Brunox Epoxy rust stopper and primer 25 ml

BRUNOX Epoxy is a rust converter and primer in one. The product reacts with iron and rust to form a black, compact protective layer that also serves as a primer. This way you stop rust and lay the foundation for the topcoat at the same time.

What you use it for

Anywhere iron and steel rust, indoors and outdoors: stair railings, fencing, gates, machinery and vehicles. Not suitable for underwater use.

Properties

Contains no chromate, zinc or phosphoric acid and penetrates deeper into the rust pores than emulsion-based rust converters. Unlimited shelf life.

Application

Remove loose rust, grease and dirt with a wire brush or sandpaper and wipe off the dust; do not use thinners or silicone cleaner. Apply the product with a brush or roller in thin coats, always in the same direction. Best at 20 °C, not below 10 °C. Dust-dry after about 2 hours, second coat within 6 hours. Fully cured when a fingernail no longer leaves a mark. Do not wash or sand; an extra primer is not needed. Then topcoat with an opaque gloss paint.

Packaging

25 ml bottle. Also available in 250 ml and 1 litre.