Hammerite Metal Paint high gloss black spray can 400 ml

A rust-inhibiting metal paint in a spray can, in high gloss black (S060). It can be applied directly over rust and stops the rusting process; according to Hammerite it protects for up to 8 years.

What you use it for

On ferrous and non-ferrous metal, wood, hard plastic and sound paint layers, interior and exterior, for example stairs and garden furniture made of steel or cast iron. On non-ferrous metals, first apply a coat of Hammerite Adhesion Primer.

Application

Clean and degrease with Hammerite Metal Degreaser, remove loose rust and poorly adhering paint and sand with P60 to P80. Spray at least 3 thin, even coats from about 30 cm, without holding the can still in one spot. Dust-dry after 1 hour, recoatable after 15 minutes, fully hardened after 48 hours. Apply between 10 and 30 °C. Coverage 1 to 2 m² per can.

Please note

Cover the surroundings generously for at least 2 metres around the object because of the overspray, and ensure good ventilation without draughts. Do not spray near open flames or sparks. Allow the spray can to reach room temperature for 2 hours before use and shake for at least 3 minutes. After use, turn the can upside down and spray until only propellant escapes, so that the valve does not clog. Store in a dry, well-ventilated place, protected from frost and strong sunlight. Also read the warnings on the label.

Pack size

400 ml spray can, high gloss black.