Hammerite Radiator Paint spray can 400 ml

A glossy, heat-resistant paint in a spray can, specially for radiators and central heating and hot water pipes. It dries quickly and gives a durable finish.

What you use it for

For repainting iron and steel radiators and central heating pipes, and on sound paint layers, interior only. High gloss.

Application

Clean and degrease with Hammerite Metal Degreaser, remove loose rust and poorly adhering paint and sand with P60 to P80 (sound paint layers with P220 to P280; spray a test patch first: if the old coat does not wrinkle or soften after about 15 minutes, you can spray over it). Spray at least 3 thin, even coats from about 30 cm, without holding the can still in one spot. Next coat after 15 minutes (wet on wet) or only after 4 hours. Dust-dry after 1 hour, fully hardened after 48 hours. Leave the radiator to dry for at least 24 hours and then bring it up to temperature gradually. Apply between 10 and 30 °C. Coverage 1 to 2 m² per can.

Please note

Cover the surroundings generously for at least 2 metres around the object because of the overspray, and ensure good ventilation without draughts. Do not spray near open flames or sparks. Allow the spray can to reach room temperature for 2 hours before use and shake for at least 3 minutes. After use, turn the can upside down and spray until only propellant escapes, so that the valve does not clog. Store in a dry, well-ventilated place, protected from frost and strong sunlight. Also read the warnings on the label. Due to the composition, slight yellowing may occur in light colours. Dispose of empty packaging and paint residues as chemical waste.

Pack size

400 ml spray can, available in RAL 9010 and white.