Red Devil One Time Lightweight Filler

Red Devil One Time is a ready-to-use, lightweight filler for filling and repairing holes, cracks and joints. The packaging promises a one-step repair: the paste fills well and shrinks very little.

What you use it for

Finishing, repairing and filling holes, cracks and joints in various substrates, interior and exterior. For exterior use, apply at least two coats of paint over it.

Properties

Good filling power, minimal shrinkage, easy to apply and sand, and can be painted over well. The colour is white.

Application

The surface must be dry, clean and dust-free; remove any loose paint first. On dusty surfaces such as old plasterboard or concrete, the manufacturer recommends a fixing primer. Fill deep holes first to 20 to 30 mm below the surface. Apply the paste with a stainless steel filling knife or spatula in layers of 5 to 30 mm, press it in firmly and smooth it off. Apply between 5 and 32 °C. If the paste has dried out slightly, you can add a drop of water. Clean tools with water straight after use.

Drying times

At 20 °C and 65% humidity, you can apply a further coat after about 30 minutes. Sandable after about 2 hours, paintable after about 2 hours with water-based paint and after about 24 hours with solvent-based paint. Fully cured after about 7 days; times depend on layer thickness and conditions. If you are painting over it with a matt emulsion, sand the filler lightly first, otherwise it may show through.

Packaging

Tub of 250 ml, 1 litre or 4 litres.