Repair Care Dry Fix Uni epoxy primer-sealer small, component A+B set

Dry Fix Uni is Repair Care's flexible epoxy primer-sealer for all types of Dry Flex and Bio Flex. It ensures good adhesion between the repair paste and the substrate. This small set contains component A (80 ml) and component B (40 ml).

What you use it for

Pre-treating wood that you then repair with Dry Flex or Bio Flex. Also suitable for brickwork, plaster, concrete and metal. Dry Fix Uni is not a wood rot stopper: affected wood must first be removed back to sound wood. The product consolidates the substrate so that the paste adheres well.

Properties

Thin and fluid, so easy to apply with a brush. Flexible, solvent-free and non-shrinking. The mixture turns yellow once the components are properly mixed. The pot life is 1 hour.

Application

Shake component A (transparent) before use. Measure out A and then B using the dosing marks on the bottles into a clean mixing cup and stir thoroughly. Brush the mixture onto the surfaces to be treated. Leave it to soak in for 20 to 45 minutes and remove anything that has not soaked into the substrate with absorbent paper. Apply Dry Flex or Bio Flex within 24 hours. Application temperature 0 to 35 °C. Wear nitrile gloves; latex, vinyl and painter's gloves do not give sufficient protection against epoxy.

Pack size

Set of component A (80 ml) and component B (40 ml).