Repair Care Dry Flex 4 2-in-1 wood repair paste 150 ml

Dry Flex 4 is the Repair Care wood repair paste you use all year round: pleasant to work with and sandable and overpaintable after about 4 hours. This 2-in-1 cartridge contains both components together, so you can use it in any single dispensing gun (caulking gun).

What you use it for

Permanent repair of damaged and rotten wood in window frames, doors, stairs and furniture, among other things. Also for bonding and filling cracks, knots and (open) joints, and for renovating, restoring and modelling wooden structures and profiles. Interior and exterior. Can also be used on brickwork, plaster, concrete and metal.

Properties

The paste behaves like wood: you work it and paint it in the same way, and it moves with the wood. Meets the requirements of KOMO, TNO and SKH.

Application

Pre-treat bare wood first with Dry Fix Uni. Dispense the paste with a single dispensing gun onto a mixing board and mix component A (orange) and B (transparent) with a modelling knife until the colour is even. Apply and remove excess product immediately. Working time at 20 °C: 20 to 25 minutes. Application temperature 0 to 35 °C. Layer thickness 5 to 20 mm (at 10 to 35 °C) or 5 to 50 mm (at 0 to 10 °C). Not suitable for filling; for that there is Dry Flex SF. After curing, sand lightly and always overpaint, because epoxy itself is not UV-resistant.

The curing time of 4 hours applies to a layer thickness of 1 cm at 20 °C. Temperature, layer thickness and humidity have an influence.

Packaging

2-in-1 cartridge of 150 ml, component A+B.