Repair Care Dry Flex SF 2-in-1 repair filler 150 ml

Dry Flex SF (Super Finish) is the durable repair filler from Repair Care, for quickly filling and repairing small defects and irregularities in wood. A primer-sealer is not needed. At 20 °C it has cured after half an hour, at 5 °C after 1 hour. This 2-in-1 cartridge contains both components together, so you can use it in any single dispensing gun (caulking gun).

What you use it for

Filling and repairing small defects in wood, filling nail and screw holes and smoothing out small irregularities in earlier repairs. For small repairs where the damage was not caused by stress in the substrate. Interior and exterior. Can also be used on brickwork, plaster, concrete and metal.

Properties

Easy to apply and very easy to sand. Meets the requirements of KOMO and is included in the SKH publication 'Het gebruik van reparatiemiddelen' (the use of repair products).

Application

First remove the paint system on the spot. Dispense the filler with a single dispensing gun onto a mixing board and mix both components with a modelling knife until the colour is even. Working time at 20 °C: 7 to 10 minutes. Application temperature 0 to 30 °C. Layer thickness 0 to 6 mm. Sandable and overpaintable after half an hour. After curing, sand lightly and always overpaint, because epoxy itself is not UV-resistant.

Packaging

2-in-1 cartridge of 150 ml, component A+B.