Tenco Bottomcoat bronze finishing coat

A smooth, protective finishing coat in bronze for Tenco Bottomcoat black. Intended for pleasure craft and inland waterway vessels sailing in fresh or brackish water. The smooth surface makes it harder for algae to take hold, and any growth is easy to remove.

What you use it for

As a finishing coat over Tenco Bottomcoat black, the underwater coating from the same brand.

Application

The Tenco Bottomcoat black surface must be sufficiently dry. Stir well before and during use and apply with a brush or paint roller; one or two coats over the black coating. Do not apply in full sun, on wood at a minimum of 8 °C and on steel at a minimum of 10 °C (maximum 25 °C at 80% relative humidity). Dust-dry after 6 hours and recoatable after 24 hours at 18 °C. Coverage 8 to 10 m² per litre. Ready to use; clean tools with white spirit.

Packaging

1 litre or 2.5 litre tin, bronze.

Please note

Contains, among other things, solvents (hydrocarbons C9, aromatics). Flammable liquid and vapour; may cause respiratory irritation and drowsiness or dizziness. Toxic to aquatic life with long-lasting effects. Repeated exposure may cause skin dryness or cracking. Wear protective gloves and eye protection and work in a well-ventilated area, away from ignition sources. This is a bitumen-based finishing coat and, according to the manufacturer, not an antifouling paint approved as a biocide; no Ctgb authorisation number is stated. According to the safety data sheet, the product is intended for professional and consumer use. Read the safety data sheet before use.