Too little paint in the house means a trip to the shop halfway through the job; too much means a leftover tin you have to store. Three figures usually do the trick: the surface area, the number of coats and the coverage on the product information sheet.
How to calculate it
Every sheet states a theoretical coverage: the number of square metres you can paint with one litre. It is a guideline, not a guarantee. The method is always the same:
- Measure the surface area in square metres (length times height, not counting windows and doors).
- Multiply by the number of coats.
- Divide by the coverage per litre. Calculate with both the lowest and the highest figure, and you get a range.
The number of coats needed is not fixed. For the wall paints, the sheet says: one or more coats, depending on the colour and the substrate.
Example 1: a wall
Say a wall of 4 by 2.6 metres is 10.4 m². Two coats of spray and roller emulsion then come to 20.8 m². The sheet gives 6 to 8 m² per litre:
- 20.8 divided by 8 is 2.6 litres
- 20.8 divided by 6 is 3.5 litres
A 2.5 litre tin is therefore tight, so here you choose 5 litres. The spray and roller emulsion comes in 1, 2.5, 5 and 10 litres. You can read more about the choice under our wall paint.
Example 2: a door and a window frame
Take a door of 2 by 0.9 metres, painted on both sides: 3.6 m². You measure a window frame differently: length times the width of the profile you are painting. Say 5 metres long and 15 centimetres wide, which is 0.75 m². Together that is 4.35 m². These are example dimensions; measure your own door and window frame.
Primer, one coat on bare wood: the Primer covers 10 to 12 m² per litre. That is 4.35 divided by 12 to 10, so roughly 0.4 to 0.45 litres. When you need to prime, read When is primer needed, and which one should you choose?
Gloss paint, two coats: 8.7 m² in total.
- PU Topcoat Satin, 10 to 12 m² per litre: 0.73 to 0.87 litres
- Topcoat High Gloss XO, 10 to 15 m² per litre: 0.58 to 0.87 litres
In both cases a 1 litre tin is enough. Both paints come in 0.5, 1 and 2.5 litres. Have a look at the solvent-based paint in satin if you are looking for a choice.
Why it may turn out differently for you
The coverage on the sheet is theoretical. That is why you calculate with the range and not with a single figure. Colour matters too: the sheets explicitly make the number of coats depend on colour and substrate. Whether two coats will be enough therefore depends on your situation.
If you thin the paint, do so only where the sheet allows it. Apply the spray and roller emulsion undiluted where possible; thin the Topcoat High Gloss XO with white spirit if necessary.
Not sure?
For tools, see our rollers. If you are unsure about the quantity, drop in at one of our shops. Bring the measurements and we will work it out with you.